Milight Hub case

This is a case for a DIY Milight hub.
See: https://github.com/sidoh/esp8266_milight_hub


### What do I need to build this?

- Nodemcu board with CP2102
- Custom PCB
- NRF24L01+
- 2 small screws
- sma socket
- glue to glue the parts of the top case
- Soldering skills

### How to do it?
- print the second part with support. I added a second version (2_v2) of the top case with the antenna hole on the side. This way you don't need to change the sma socket.
- you will need to desolder the pins of the nodemcu board and solder a pin header
- desolder the sma socket of the NRF24L01+ module to solder a sma socket without 90 degrees angle
- glue top case

If you don't want to make it yourself, I can build it for you. Just contact me via email (h4nc.zigbee(a)gmail.com) or with a private message in the home assistant forum.

https://community.home-assistant.io/t/buy-a-ready2use-zigbee2mqtt-stick-flashed-antenna-mod-and-printed-case/111743/124?u=h4nc