Milk jug cap

3D Printing Instructions:=1. File Preparation:Slicing: Import the STEP file into your preferred slicer (e.g., Cura, PrusaSlicer, Bambu Studio).Orientation: Place the part with its largest flat surface facing the heatbed to ensure maximum adhesion and minimize the need for supports.Supports: * Support: Enabled (Tree/Organic supports recommended for easier removal).Support Threshold: 45 degrees.Build Plate Adhesion: Use a Brim (5-10mm) if the part has thin edges or if you are using materials prone to warping like ABS/ASA.2. Material & Temperature:Material: PLA (for prototyping) or PETG/ABS (for functional use).Nozzle Temperature: 200-220°C (PLA) / 230-250°C (PETG).Bed Temperature: 60°C (PLA) / 70-80°C (PETG).3. Print Settings:Layer Height: 0.2mm (Standard) or 0.12mm (High detail).Wall Line Count: At least 3 walls for structural integrity.Infill: 15-25% (Pattern: Gyroid or Grid).Top/Bottom Layers: 4-5 layers.4. Post-Processing:Carefully remove support structures using pliers.Lightly sand