Milotic_WaterBase (Printable)

This ist A Remix from the Swimming Milotic from Sketchfab by the Creator [jeykonunderscore][1]

[1]:https://sketchfab.com/3d-models/milotic-ee3ac27c5e6a474da6b787bf170837e8

And a Waterdrop "Splash Cup"by [nefilim][2]

[2]:https://www.thingiverse.com/thing:4283788/files.

Printed on

![Image][1]

Print Settings

Nozzle:0.4
Material: Anycubic PLA High Speed
Bed Temp.: 55 C°-60 C°
Print Temp.: 215 C°
Layerheight: 0.24 mm
First Layer: 0.20 mm
Top Layer: 4
Bottom Layer: 3
Infill: 15%
First Layerspeed: 45 mm/s
Outer Wall Speed: 120 mm/s
Inner Wall Speed: 200 mm/s
Support: Tree
Angle: 30-40%

All Settings in attached as Pictures.