Mimikyu. Hueforge

Project: Mimikyu.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 188x235mm in sizeYou may print at higher layer heights below the Min Depth of 0.96mmThe Max Depth is 3.2mm and the Actual Depth is 3.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Gold Transmission Distance: 2.3 PLA BambuLab Basic Jade White Transmission Distance: 6This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #17 (1.44mm) swap to Blue Gray At layer #22 (1.84mm) swap to Red At layer #31 (2.56mm) swap to GoldBorder Only Colors from here until the end. At layer #36 (2.96mm) swap to Jade WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it. At layer #41 (3.36mm) swap to Black for the rest.