Thingiverse
Minecraft lantern lamp
por pawelmim
20
Descargas
38
Likes
1
Makes
Dimensions 170/170/278 mm
As a light I used an RGB LED strip for TV on USB, from the bottom you can put inside the powerbank, and it works.
As a glue for elements I used some epoxy 2-component glue, and thermal glue in some spots. I recommend using a soldering iron to mount the handle. (but the glue itself will be good anyway, it will last too)
Ultimately, the project assumed the installation of an E14 bulb holder, also led with a remote control.
THERE ARE NO CABLE HOLES IN THE PROJECT
lamp vid: https://drive.google.com/file/d/1-vNSgakRCotq_oDvCXgzvEr7UliIKCOI/view?usp=sharing
As a light I used an RGB LED strip for TV on USB, from the bottom you can put inside the powerbank, and it works.
As a glue for elements I used some epoxy 2-component glue, and thermal glue in some spots. I recommend using a soldering iron to mount the handle. (but the glue itself will be good anyway, it will last too)
Ultimately, the project assumed the installation of an E14 bulb holder, also led with a remote control.
THERE ARE NO CABLE HOLES IN THE PROJECT
lamp vid: https://drive.google.com/file/d/1-vNSgakRCotq_oDvCXgzvEr7UliIKCOI/view?usp=sharing
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
