Thingiverse
Minecraft USB Ore Lamp
door RawDR
11
Downloads
7
Likes
0
Makes
This is a light up Minecraft ore block utilizing cheap USB LED lights that I got from aliexpress. It plugs directly into any old 5v USB charger. You customize the ore by coloring a piece of paper which makes up the shade, into any ore you want! Or you can even make each side a different color.
Printed parts:
All parts printed in 0.2mm layer height with white PLA. I then painted with enough coats to make it opaque to light. If you use grey filament you could probably leave unpainted.
Block: Print the block upside down, no slicer supports needed. Each of the 5 sides has two supports built into the model (see picture). You can quickly clip these out with flush cutters.
Key: After printing, it might be just oversized after accounting for squish out of the plastic at the corners. I clip each corner with flush cutters to help it fit. You could also file/sand the sides flat.
Cover: Print with the flat part down. This part includes one bridged section. Hopefully your printer can h
Printed parts:
All parts printed in 0.2mm layer height with white PLA. I then painted with enough coats to make it opaque to light. If you use grey filament you could probably leave unpainted.
Block: Print the block upside down, no slicer supports needed. Each of the 5 sides has two supports built into the model (see picture). You can quickly clip these out with flush cutters.
Key: After printing, it might be just oversized after accounting for squish out of the plastic at the corners. I clip each corner with flush cutters to help it fit. You could also file/sand the sides flat.
Cover: Print with the flat part down. This part includes one bridged section. Hopefully your printer can h
RawDR publiceert ook op
14 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!