Mingda D2 BMG and E3D V6 mount

This is a remix of the Hero Me Gen 5 mount for the Mingda D2 to mount a BMG extruder clone and E3D V6 clone. It uses the stock fan for cooling the heatsink on the E3D V6, but uses a 4020 blower fan for part cooling instead of the stock 4010 fan. You can download other part cooling fan mounts for the Hero Me Gen 5 and they should also work on this mount. A little rough around the edges since it was done in TinkerCAD and I'm not the best at CAD, but it works.

https://www.thingiverse.com/thing:4460970

The BLTouch mount is a remix from:

https://www.thingiverse.com/thing:4659128

Your x, y and z endstop switches must be moved a bit for this to work. You will lose 10 or 15mm on your build surface and z height., but I was okay with that. Y endstop is easy to adjust. Z endstop will require tightening the z endstop screw quite a bit. X endstop can be adjusted by flipping the bracket that holds the x endstop switch 180 degrees.

You will also need 2 M3x40mm hex screws to att