Thingiverse
Mini 2 axis Gimbal Controller Box Enclosure
door RafalVolks
14
Downloads
14
Likes
0
Makes
Box (Enclosure) for Mini 2axis gimbal controller GCBv3.5 Designed by GLB. Only modification to controller is solder angled pins for power supply instead of having soldered cable with balance plug - this is not necessary.
There are two versions of bottom part one universal that you can just mount with double sided tape and one created for our CBQ330 frame - soon to be realised.
To finish off you will need to remove material in holes of top part - I just run tap through it - it's there for clean print without support. Use 4 M3x12 bolts to put it together.
Print: 0.2 later, 0.8 wall thickness (on UM2)
There are two versions of bottom part one universal that you can just mount with double sided tape and one created for our CBQ330 frame - soon to be realised.
To finish off you will need to remove material in holes of top part - I just run tap through it - it's there for clean print without support. Use 4 M3x12 bolts to put it together.
Print: 0.2 later, 0.8 wall thickness (on UM2)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
