Slicer Discord
Mini bong keychain v1 – 3D printable model from MakerWorld MakerWorld
Gadgets

Mini bong keychain v1

255 Downloads
92 Likes
189 Makes
Go to Model
This keychain actually works!Although obviously it does not do much, it is actually compatible with a 14mm glass slider like most regular bongs, and if filled with a little amount of water, it will actually percolate, making this a pretty cool party trick! I bent the neck backwards a little to make it more easy to hit.The keychain hole is 5mm, so if you wish to scale the model down because you just like the looks of it and don't want the functionality, keep that in mind.Differences between v1 and v2Both keychains are actually usable, but what is the difference? with this version, you can only use the keychain with a slider: although a pretty cool trick, you probably won't be going around with a glass piece in your pockets. v2 instead can be used with a normal joint: the hole is much smaller, and the percolation is designed not to raise back into the inline, so you can slide your joint's filter in and it doesn't get wet.PLEASE NOTESmoking is really hazardous. Especially from unsafe plas
Category
Gadgets
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Why?
supports needed
Single piece Supports required
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
50 mm (Small)
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Toxin_Labs also publishes on

4 additional models across 1 more platforms

Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for Mini bong keychain v1?
Any FDM printer should handle Mini bong keychain v1 just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Mini bong keychain v1 need supports when printing?
Yes, Mini bong keychain v1 will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is Mini bong keychain v1 available in?
Mini bong keychain v1 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Mini bong keychain v1 free to download?
Yes, Mini bong keychain v1 is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection