Mini Brick VR Headset

Everyone deserves the ability to experience VR so why not your tiny brick minifigure friend? This VR Headset fits onto brick minifigure sized heads and the controllers fit into similar hands. Note that due to the physical properties of different plastics, getting the tolerances just right is a bit of an experiment. Instructions below but I recommend printing with a max .10 layer height and doing a test in all white before you print the multicolor print as odds are it won't fit correctly the first time. Print Instructions:Start with just the headset and eye pieces as ONE color.I've set this up under the “Test Plate” in the pre-configured settingsYou'll need to dial in the “X-Y Hole Compensation” underneath the “Quality Tab”One brick head I had was slightly smaller so I used “-0.1”mm (decreasing the hole by 0.1mm) but you may need to increase or decrease it accordinglyOnce you've dialed in the sizing, feel free to print the headset in multicolorYou could also try painting