Mini can grabber robot

Made by FTC team 26239

This is a small robot that can pick things up and drive around. It uses 4 servos and various GoBilda parts (see .txt file). It's a fun, small robot that you can quickly build. The 3d printed parts can be glued together, but they become very hard to undo if you glue them together.

Use the file "Can Stacker Bot" to see a completed model of the robot.

First, take the 2 base side pieces and place them next to each other on the edge with the rectangular slots on the bottom. Then, take a servo with the 25-tooth gear on it and have the rotation piece facing inwards towards the other wall, and then screw in the servo. Next, take the Arm Brace piece and put it in the two slots right next to the servo in each wall. Then, take the Bottom piece and put it into the bottom row of slots in both side pieces. At this point, the two pieces should be connected by the bottom and arm brace piece. Then, take one of the axles and place it into the hole above the servos. Put a colla