Thingiverse
Mini desktop case (raspberry Pi4)
by Endert0m
67
Downloads
37
Likes
0
Makes
This is a mini desktop like raspberry pi4 case.
You will need x8 (M4x8mm) screws and x4 (M4x15mm) screws, then a 50x50x10mm fan (i used an old one from cooler master), two LEDs (one green and one red), and a 100Ω resistor. You will also need x4 tiny screws to hold the raspberry into the case.
To spread the light well, you should use some white translucent plastic and a bit of paper in front of the LEDs.
You will need x8 (M4x8mm) screws and x4 (M4x15mm) screws, then a 50x50x10mm fan (i used an old one from cooler master), two LEDs (one green and one red), and a 100Ω resistor. You will also need x4 tiny screws to hold the raspberry into the case.
To spread the light well, you should use some white translucent plastic and a bit of paper in front of the LEDs.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
