Mini Drill press for PCB

I love this little PCB drill. It works very well and it is much much better than a hand held drill like a Dremel.

I design the bottom bracket with 4 holes for LEDs, if you don't want to use LED's just print two of the top brackets instead.

Materials and tools needed for this project:

MATERIALS:
-77mm M6 threaded rod.
-77mm M6 smooth rod (or threaded if you don't have smooth rods).
-x2 100mm M8 threaded rods.
-x4 M6 nuts (3 normal and 1 Nylock)
-x3 M6 washers.
-x4 M8 nuts.
-x2 M8 washers.
-x3 M3x5mm bolts. (flat head)
-x10 M3x10mm bolts.
-x2 M3x15mm bolts.
-x2 M3x20mm bolts.
-x10 M3 Nylocks nuts.
-M3 normal nut.
-x10 M3 washers.
-x2 25mm coil springs.
-Heat-shrink (optional).
-Drill motor with bit attachment (27mm diameter).
-4 High power 3mm LEDs and appropriate resistor.

TOOLS;

-13mm spanner.
-x2 10mm spanner.
-Super glue.
-Hacksaw (to cut the rods).
-Screw drivers or allen keys. (Depending on the head of the bolts you have).

Get in touch if yo