Thingiverse
Mini Drill Press / PCB drill
par dan241297
111
Téléchargements
83
Likes
0
Makes
Mini desk top drill press for drilling PCBs and 3D printed plastic.
If you cannot find the same motor which i have used then designing your own clamp shouldn't be too difficult. This could be a good idea anyway since my motor is not very powerful at all.
Parts which are not 3D printed:
M4 Threaded rod, (2x 190mm length),
Aluminium tube (I.D. 4mm) (O.D. 6mm),
Linear Bearings (2x need to fit onto the 6mm rod),
11mm Cir-clips for the bearings,
Motor (salvaged from old electronics),
Chuck available here: https://www.aliexpress.com/item/F85-1-set-7Pcs-0-5-3mm-Electric-Drill-Bit-Collet-Micro-Twist-Drill-Chuck-Set/32601527405.html
If you cannot find the same motor which i have used then designing your own clamp shouldn't be too difficult. This could be a good idea anyway since my motor is not very powerful at all.
Parts which are not 3D printed:
M4 Threaded rod, (2x 190mm length),
Aluminium tube (I.D. 4mm) (O.D. 6mm),
Linear Bearings (2x need to fit onto the 6mm rod),
11mm Cir-clips for the bearings,
Motor (salvaged from old electronics),
Chuck available here: https://www.aliexpress.com/item/F85-1-set-7Pcs-0-5-3mm-Electric-Drill-Bit-Collet-Micro-Twist-Drill-Chuck-Set/32601527405.html
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
