Thingiverse
Electronics
Go to Model
Mini ESP32 TV - Simpsons Addons
46
Downloads
67
Likes
0
Makes
Some addons for the Mini ESP32 TV by Megazoid. I already have the popular Simpsons TV and also built the Mini ESP32 TV and started to wonder if I could also make a Mini Simpsons TV.
Its a similar retro style so used the original case files and created the VCR box to glue on top. I used 1.75mm filament as the antennae, maybe a little too thick but you can use whatever you want, the hole is 2mm so glue maybe required to keep it in place.
I also designed a replacement select button. You dont have to use it, the original tact switch will work but if you want to use my remixed select button you will need a 6x6x4.3mm tach switch rather than the 9.5mm. I think a 5mm will also work as there is some wiggle room (you could always sand down the select button base if its a little tight)
I did wonder about some feet but not sure how well they would adhere.
Its a similar retro style so used the original case files and created the VCR box to glue on top. I used 1.75mm filament as the antennae, maybe a little too thick but you can use whatever you want, the hole is 2mm so glue maybe required to keep it in place.
I also designed a replacement select button. You dont have to use it, the original tact switch will work but if you want to use my remixed select button you will need a 6x6x4.3mm tach switch rather than the 9.5mm. I think a 5mm will also work as there is some wiggle room (you could always sand down the select button base if its a little tight)
I did wonder about some feet but not sure how well they would adhere.
DynaMight1124 also publishes on
98 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
