Mini Forcible Entry Door (Training & Display)

This Mini Forcible Entry Door is a 3D-printed scale model (approx. 1:10) of a classic breaching door used in firefighter and rescue training, only much smaller and desk-friendly.It works both as a display piece and as a dry-training prop:You can set a mini Halligan tool into the gap, flex the door, and practice placing the wedge.Please note: the stiffness of the door is not comparable to a metal forcible entry door so training may not be 100% accurate.AssemblyThe model is printed in multiple parts and can be assembled easily.Additional parts required:2 × M3x20 screws2 × M3 self-locking nutsA few drops of super glueReinforcement pin: wooden skewer (higher stability but impossible to break) or balsa wood stick (recommended for extra realistic training).Step-by-step AssemblyAttach the protector to the door:Apply 2–3 drops of super glue into the recessed groove on the door.Slide the protector piece into the groove until it fits snugly.Mount the door to the frame:Screw the door leaf to the