Thingiverse

Mini glue gun support

by Jtcircus

11 Downloads

8 Likes

0 Makes

I designed this mini glue gun support for use in the classroom.

My glue gun station will hold an 8.5" x 8.5" sheet of paper for the inevitable glue mess. The paper will be quickly interchangeable

I will also add a non-stick feature below the hot tip (maybe a piece of silicone baking mat or tile or little piece of sheet aluminum).

2 hr 15 min print time. No raft. No supports.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Mini glue gun support need supports when printing?

No supports needed for Mini glue gun support — it's designed to print clean off the bed.

How long does it take to print Mini glue gun support?

According to the design notes, Mini glue gun support takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Mini glue gun support available in?

Mini glue gun support is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Mini glue gun support free to download?

Yes, Mini glue gun support is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Mini glue gun support

Add to Collection