Mini Manual PnP

I built one of the originals, but for smaller quick jobs I thought, since I had some spare bits around, a second smaller model would do.

So, I designed 3 parts and then used the rest from the original.

I did mod the slide posts, to have a press fit, to remove the need for holes to line up, between the slide and the linear rail.

**UPDATE**
The original slide was fragile. It was fine until I bumped it while putting the machine into my car. Fairly shattered the thin "box" that the linear rail fitted into. So I updated the "box" to be thicker.

I have also added 8mm and 12mm strip feeders, all you need add are 6mm diameter by 3mm thick magnets. Assuming you're using the 1 odd mm steel plate under the frame as I am. Just a hint, I print all 8mm in one colour and then 12mm in another and use the numeric code on the print to mean the strip count. If you're using an assembly planner such as [VisualPlace](https://www.compuphase.com/visualplace/visualplace_en.htm), you can then cite so