Thingiverse
Mini MicroSD Card Case v2
door ivolucas
6.9k
Downloads
4.4k
Likes
41
Makes
My second attempt, designing a storage case for 4 micro sd and an sd card or sd card adapter.
This version is similar to the original, it uses a little more plastic, but gives a more solid fill when handling it.
After printing, it may be necessary to use light force to release the hinge.
Three versions are available for download with different clearance for the hinge. If your printer is not very tune, please use the 0.4mm or 0.5mm version.
### Update 2021/12/18
The Freecad file now has a configuration spreadsheet where you can change the adjustment margins for microSD, SD and hinge clearance.
1. Open the spreadsheet called "Config"
2. Edit the values in the spreadsheet
3. Select the two objects in the tree on the left
4. Right click and select "Recompute object"
5. With both objects still selected go to "File" >> "Export"
This version is similar to the original, it uses a little more plastic, but gives a more solid fill when handling it.
After printing, it may be necessary to use light force to release the hinge.
Three versions are available for download with different clearance for the hinge. If your printer is not very tune, please use the 0.4mm or 0.5mm version.
### Update 2021/12/18
The Freecad file now has a configuration spreadsheet where you can change the adjustment margins for microSD, SD and hinge clearance.
1. Open the spreadsheet called "Config"
2. Edit the values in the spreadsheet
3. Select the two objects in the tree on the left
4. Right click and select "Recompute object"
5. With both objects still selected go to "File" >> "Export"
ivolucas publiceert ook op
2 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
