mini open airflow case

this is ai first design and is still being optimized.If you are interested, you can try it. There are other better ones being designed.Notes:1. The power switch is a 16MM round computer switch. 2. The nut is an M3*5*4 through-hole knurled nut.3. The screws are 6, 8, and 12mm length M3 screws, and the screw head diameter is less than 5.4 (the one in the video is 5.2, 5.3 is also OK). 4. The recommended motherboard is the MSI B760i, which comes with a motherboard baffle. Some motherboards with the CPU positioned higher may not be perfectly compatible.5. If two fans are installed on the top, the memory height limit is 40mm.6. The radiator can only use IDcooling 67XT (the back panel is relatively thin).7. Custom wire is required, and silver-plated wire is recommended. 8. The magnet size of the magnetic top cover is 5mm in diameter and 1.5mm thick.9. It is difficult to install, and it is not recommended for novices!10.Power supply supports up to SFX-L(The A1mini printing plate is too small