Mini Pixel Clock Display

3 part design.Front and back made from Matte White PLA.Grid needs to be printed from black or grey PLA to direct light toward front.Grid colour is important should be dark to not allow light leaking and glowing effect.If You want better quality print each part separately.Provided files are STEP for better print quality (You need to dissasemble it in slicer).A little bit of sanding may be required on grid to fit inside front panel on all sides.First start by assembling diffuser grid together with mini led dotstar panels 8x8 grid.Some sanding of panels PCB on 2 sides may be requred then just push it in grid and solder together.ESP module used is ESP32-C3 Super Mini.Clock is powered through USB-C and 5V pin on ESP32-C3 module is powering LED board.ESP module is glued with double sided tape but You can use hot glue.Back is glued by superglue.That is all, have fun assembling.Mine is glued on Ikea Skadis using double sided foam tape.