Mini Scar-h

This is a desktop sized fully functional Scar-h. With moving bolt, rear stock, magazine, and sights.

I will be updating this with a better magazine that has a magnetic connection. I will also provide a different option for the handle on the bolt. More details shortly

Items Needed:
Qty 2, M3 bolts M3 x12mm. One for each the stock mount and hinge.
M3 bolt handle, for the Scar Bolt. M3x 4mm to 8mm, either is fine.
1 light spring 1 inch in length. A pen spring should be fine.

Build Instructions:
Print everything with the best orientation for your printer. To build the stock you will need a m3 tap or drill out the hole with a 2.5 or 3mm bit. Then tap the holes in the rear mount that the stock connects to. Tap the hole in the stock, and then the one on the bottom of the main body above the hand grip. The bolt will need an M3 bolt in order to cock the gun. So tap the hole in the bolt. Then slide it into the main body and screw in the M3 bolt. Slide the spring in behind it,