Mini Screwdriver Shelf

I was inspired by a Design I saw online for a mini shelf. Unfortunately that design had very small holes and did not fit my recently found mini screwdrivers (hex). Turns out I had exactly the right Hex screwdrivers back from my days playing with RC Helicopters and such - They were 3/4 sizes I required for the Creality Ender 3 printer. 1.5 / 2.0 / 2.5 / 3.0 mm hex.

The only one missing was the 4.0 used for frame assembly, and that allen wrench is with my printer accessories (and not likely needed often) so I set out and designed this wall-mounted holder in Fusion 360. It is not a perfect design as I tried to get a very light, back skin on the shelf under the "label plate" .

The label plat is a VERY tight fit and sometimes, depending on the amount of "Elephants foot effect" I had to trim off the little lock in tabs to make it fit. I was trying for a very tight fit.

The best part of this print is the clearly legible text using 2 colors of filament. - Welcome to the M600 command.