Thingiverse
Mini SMLE - Updated Model
von MarcoCammozzo
11
Downloads
15
Likes
0
Makes
Here's an updated model of my old SMLE project!
This time the model is for an undersized working rifle
Both the extractor and ejector work, chambering the round and properly ejecting once opening the bolt
To fix the extractor i used a couple thin wires inserted in the respective holes
Instead of the pin i used a metal screw to hold the bolt head while still allowing it to properly rotate
BEWARE! : The magazine is non funcional at the moment, single feed is the best way to use it
This time the model is for an undersized working rifle
Both the extractor and ejector work, chambering the round and properly ejecting once opening the bolt
To fix the extractor i used a couple thin wires inserted in the respective holes
Instead of the pin i used a metal screw to hold the bolt head while still allowing it to properly rotate
BEWARE! : The magazine is non funcional at the moment, single feed is the best way to use it
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
