Thingiverse
Mini Spiral Illusion
par bcad
5
Téléchargements
6
Likes
0
Makes
A smaller take on the spiral illusion goung around. It can fit on a Prusa Mini and most small printers.
REQUIRES:
- glue
- M3 hardware
All parts will print in 0.2mm layer heights as tolerences are fairly low.
be sure to include brims for the spiral parts to reduce deformations.
To assemble, slide the upperOuter and upperInner pieces into the top.
Then slide the slider onto the inner and outer spiral. Make sure it is on all the way.
Use plastic cement or CA glue to glue the spirals into their slots in upperOuter and upperInner, ensureing that everything is level.
The base can then be screwed on using M3 screws.
REQUIRES:
- glue
- M3 hardware
All parts will print in 0.2mm layer heights as tolerences are fairly low.
be sure to include brims for the spiral parts to reduce deformations.
To assemble, slide the upperOuter and upperInner pieces into the top.
Then slide the slider onto the inner and outer spiral. Make sure it is on all the way.
Use plastic cement or CA glue to glue the spirals into their slots in upperOuter and upperInner, ensureing that everything is level.
The base can then be screwed on using M3 screws.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !