Mini Spiral Tea Light Holder

Commercial license available for Patreon supports. Update: As requested by a user, I added a medium size version, which is between the small and large one. A smaller version of my Modern Spiral Tea Light Holder. Prints in less than 2 hours.I tested it with a real candle, but I strongly recommend using an electric tea light! If you want to use it with a real tea light, do at your own risk and print it using a flame-retardant filament.This is a rather delicate print. For best results, make sure to print slow (140-160 mm/s with slower acceleration worked fine for me) and make sure seams are not on overhangs. I added a profile with 140 mm/s top speed and manually placed seams on the right corners.Tested with Bambu Lab Matte PLA (Black). Other filaments might require even lower speeds for a good result. If you run into problems, you can set your printer into “Silent” mode to print even slower. Some people had issues printing this, so I added a profile with even slower printing speed. For be