Mini Spool Adapter for AMS

I had some old .5 kg spools of ASO filament from a 3d printing pen that I wanted to use in the AMS. This design works with other spools as well if the inner diameter is the spool 50-52mm and widths varying from 50-83mm. The outer diameter of the adapter is 200mm. Each half takes about 1hour to print on standard settings. Note: If it comes out super tight, thats OK! Screw the two sides together until it gets REALLY tight, then unscrew all the way, blow out any dust that gets lose. After doing this you will be able to screw it together further than you could before. Repeat until it goes all the way.