Mini Talon Camera Pan Wall-e

EDIT.just uploaded the latest "Puck" version of the pan head, this one runs thre same cameras as before. i would advise a light sanding of the base of the unit where it rides on the bearings to remove any trace of the print ridge lines. enjoy.

an updated version from my previous pan unit, this one has been dubbed Wall-e
this is designed for:
foxeer monster fpv cam with 2.5 mm lens
runcam 2 camera
632zz bearings https://www.banggood.com/10pcs-623ZZ-3x10x4mm-Ball-Bearings-Shielded-Radial-Bearings-p-1049663.html?rmmds=search
180 degree servo https://www.banggood.com/JX-Servo-PDI-9180MG-12g-180-Degree-MG-Metal-Gear-Analog-Servo-2_0kg-0_12sec-p-1028941.html?rmmds=search
you will also need 4x 10 mm m3 bolts and washers
there are two versions of the deck, one with no vtx holder and the other holds a surveilzone 400mw 1.3 vtx (the green one)
The bearing bolt holes will need to be tapped at M3as i don't trust the printer to do the fine threads.
The splay is off by 1 degree on s