Mini Talon Flight Controller Mounts

UPDATED 7/31/18

If you are putting off the assembly of your Mini Talon (gluing the fuselage halves together) because you have not decided on which autopilot mount you want, now you can go ahead and glue in the cradle and assemble the fuselage halves and still be able to swap out to just about any system you want at any time. (Before this universal mount kit, the cradle assembly once glued in place could not be taken apart to switch between system mounts if ever you decided to make a change for what ever reason.)

You will need (4) M2.5 and (4) M3 screws and taps required for mounting plates to cradle. This will allow you to put an M2.5 screw through the M3 hole without contact so that you can use any mount combination you choose at any time. (The undampened plates will screw directly to the top side of the cradle mounting tabs with M3 screws while the dampened base plates will screw to the bottom side of the cradle mounting tabs using M2.5 screws.)

Although this was primari