Slicer Discord
Mini Vise – 3D-printbaar model van Thingiverse Thingiverse
Mini Vise – Bild 1 Mini Vise – Bild 2 Mini Vise – Bild 3
Tools

Mini Vise

door MikiZed · Tools
719 Downloads
504 Likes
1 Makes
Model downloaden
**

# V1 IS [HERE](https://a360.co/3pHjM54)

**
**How this came to be:**
I printed the "Nano Vise V2", despite being super cute, I was hoping to use it for some soldering jobs but turns out, Nano really means nano uh? Not even the esp8266 I had to solder to fit in the clamp so I did what any sane person would do, instead of using one of the plenty pcb holders you can find online I completely redesigned the nano clamp from scratch because I am not touching an stl file with a ten foot pole (seriously people include solid models, and at least use 3mf file if you really need to use a mesh file).

**Print tips:**
The screws aren't under a lot of stress as they are designed with a lot of tollerances, but I would still print them at an high density, I printed mines at 100% because the time increase was not that significant.

The rest of the print is fairly easy, I printed it with 15% infill and 3 walls

Everything should take you less than 9 hours the screws taking up most of tha
Categorie
Tools
Bron
Thingiverse
Gepubliceerd
Wat je nodig hebt om te printen: Gemiddeld Gemiddelde betrouwbaarheid
Waarom?
supports nodig
Eendelig Supports vereist Hardware nodig
Supports 2/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Polycarbonate
Geschatte printtijd
9 h
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Veelgestelde vragen
Heeft Mini Vise supports nodig bij het printen?
Ja, Mini Vise heeft waarschijnlijk supports nodig vanwege overhangen en geometrie. We raden boom-supports in je slicer aan voor makkelijker verwijderen. Schakel supports in in Cura, PrusaSlicer of Bambu Studio vóór het printen.
Hoe lang duurt het om Mini Vise te printen?
Volgens de ontwerpaantekeningen duurt Mini Vise ongeveer 9 uur om te printen bij standaardinstellingen (laaghoogte 0,2 mm, vulling 15 %). De werkelijke printtijd varieert op basis van printersnelheid, laaghoogte en vullingsdichtheid.
In welk bestandsformaat is Mini Vise beschikbaar?
Mini Vise is beschikbaar in het formaat STL. Deze bestanden kunnen worden geopend en geslicet met gratis software zoals Cura, PrusaSlicer, Bambu Studio of OrcaSlicer voor FDM-printen, of ChiTuBox en Lychee Slicer voor resin-printen. De download wordt aangeboden via Thingiverse.
Is Mini Vise gratis te downloaden?
Ja, Mini Vise is gratis te downloaden via Thingiverse. Controleer altijd de licentie op het oorspronkelijke platform om commercieel gebruik, remixen en naamsvermelding te begrijpen.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie