Mini Wheeled Yeti Cooler

This is a wheeled version of my mini Yeti cooler. Print the cooler and handle in PLA or PETG, if you want you can print the wheels and latches in TPU or PLA/PETG, but I recommend TPU as its more realistic. Assembly:Remove the custom supports from the lid.Grab the handle.Using your hands or plyers, remove the supports from the handle. (Be careful not to bend and break the handle)Then take the handle and clip it into place on the cooler body. (Make sure the bent part is facing up)Take the wheels and screw them on, use an M3 x 8 - 15mm long (Make sure there not too tight so they spin)Then take the lid and some 1mm wire, 25mm long, and insert it into the hinge hole. Repeat for the other side.<strong