Mini whip case + biasT case

After printing the PCB should just slide in followed by the cap, secured by two M2.5 screws.
The biasT box is friction fit.
The cutout at the top can be used as a hanging point, or it can be mounted on tripod or any other screw with same diameter, because the hole at the bottom isn't threaded.
electronics design(not mine): https://github.com/IgrikXD/Easy-SDR/tree/master/Antenna%20Mini-Whip
mini whip in action: https://youtu.be/0kHJrLmRwTc