Thingiverse
Minimal Oculus Quest - Rift S Controller Wall Mount
von Scott64
14
Downloads
8
Likes
0
Makes
I was inspired by lensfort‘s Oculus Rift S or Quest Controller Wall Mounts and the unique way he secured the controllers using gravity.
https://www.thingiverse.com/thing:3678073
However, I am a minimalist kind of guy and wanted to capture all the nice things about this great mounting mechanism without all the filament use and supports and cleanup… So, here is my take on it.
- It’s tiny, uses very little material and can be printed on any print bed size very quickly.
- It’s fast to access your controllers: To secure them, just raise the controller up from underneath until it touches the hook then let it rest against the wall. To remove it just lift up on the handle.
- It’s inherently stable and secure since there are only two points of contact to the controller (the hook and the wall) and the third point of stability comes from gravity pulling on the controller handle.
- It works with controllers that have been modified by any grips you may have added since again, it on
https://www.thingiverse.com/thing:3678073
However, I am a minimalist kind of guy and wanted to capture all the nice things about this great mounting mechanism without all the filament use and supports and cleanup… So, here is my take on it.
- It’s tiny, uses very little material and can be printed on any print bed size very quickly.
- It’s fast to access your controllers: To secure them, just raise the controller up from underneath until it touches the hook then let it rest against the wall. To remove it just lift up on the handle.
- It’s inherently stable and secure since there are only two points of contact to the controller (the hook and the wall) and the third point of stability comes from gravity pulling on the controller handle.
- It works with controllers that have been modified by any grips you may have added since again, it on
Scott64 veröffentlicht auch auf
1 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!