Thingiverse
Minimal Spool Reel Guide for Snapmaker
door kelvin8r
414
Downloads
250
Likes
11
Makes
**Update 25 March, 2019**
Version 2 has an updated shape to the reel guide. The split for the rod hole is at the bottom.
**Description**
This makes the spool roll smoother on the spool rods. This was designed for the Snapmaker rod but should work on other 8mm diameter rods.
* small enough to be left on the rod when changing filament spools.
* accommodate spools with an inner diameter of 53mm to 72mm.
* adjust for different depths of filament spools by sliding along the rod.
Other parts required:
* 4 x 608 bearings
Version 2 has an updated shape to the reel guide. The split for the rod hole is at the bottom.
**Description**
This makes the spool roll smoother on the spool rods. This was designed for the Snapmaker rod but should work on other 8mm diameter rods.
* small enough to be left on the rod when changing filament spools.
* accommodate spools with an inner diameter of 53mm to 72mm.
* adjust for different depths of filament spools by sliding along the rod.
Other parts required:
* 4 x 608 bearings
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!