Minimal Wall/Ceiling Lamp – E27 (Hue compatible)

This is a minimalist wall or ceiling lamp that I designed and built myself.It is made for a standard E27 bulb and has been tested with a Philips Hue E27, but it may also work with other E27 bulbs depending on their size.The lamp is designed around a common E27 socket (linked below). Similar sockets may exist in other countries, but I have only tested this specific model.Hardware & partsE27 socket (example):https://www.jemogfix.dk/kronefatning-e27-hvid-elworks/7110/9011927/4 × M4 x 20 mm countersunk screws4 × M4 nuts(I used a small amount of super glue to hold the nuts in place during assembly.)Mounting & assemblyScrew the base to the wall or ceilingConnect the wires (I used WAGO connectors)Mount the front part of the lamp and tighten the screws from the frontThe design allows the lamp to be fully assembled from the front after wiring, which makes installation easier.Notes & future plansThis is Version 1 of the design.Due to the build volume of my Bambu Lab P1S, the bulb cannot be perfe