MakerWorld
Other Hobby & DIY
Zum Modell
Minimalist Chess Set
0
Downloads
3
Likes
0
Makes
This is a model that I made over the weekend. I misdid the math for the board, so the base became HUGE and printed in 4 plates! This project as seen in the photos mainly uses the colors Yellow and Blue to help honor Ukraine, but feel free to use whatever colors you want. This is a HUGE project weighing over 1 kg so be warned. Here are the steps (but you can do them in any order). 1:Print out the pieces, one side at a time using the different colors, and sand if necessary. Use a higher infill to make them a bit heavier, but not required. I printed mine out at 30% infill but I don't think it made a difference. The rest of the project is at 15% infill as it's already big enough. 2:Print out the board, making sure to select a different color as the base as to have contrast with the board, and select the correct colors. Here I would strongly recommend sanding down the top a little bit, as I found that it printed the top roughly. Once I sanded it, it made a huge difference. 3:Print o
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!