Thingiverse
Minimalist, Modular Hard Drive Racking System
por jbkuma
16
Descargas
10
Likes
0
Makes
Designed to be easy to print and assemble.
The part is ambidextrous. Print two per drive. Recommend 3 or more walls if you intend to drill the holes. I recommend using 1/2in 6-32, or 10mm or 12mm M3.
Despite hard drives being tapped for 6-32, M3 bolts can be used if you don't over torque them (as pictured). 30mm/1-1/4 bolts can be used to tie layers together, or threaded rod can be run through the stack.
Versions posted with holes sized for M3 and 6-32.
If printed "U" side flat on the bed (as pictured in "print orientation" image) no supports are required
The part is ambidextrous. Print two per drive. Recommend 3 or more walls if you intend to drill the holes. I recommend using 1/2in 6-32, or 10mm or 12mm M3.
Despite hard drives being tapped for 6-32, M3 bolts can be used if you don't over torque them (as pictured). 30mm/1-1/4 bolts can be used to tie layers together, or threaded rod can be run through the stack.
Versions posted with holes sized for M3 and 6-32.
If printed "U" side flat on the bed (as pictured in "print orientation" image) no supports are required
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!