Thingiverse
Minion Donny
di keybl1
6
Download
13
Likes
1
Makes
This assembly was created entirely by me in CAD, based on the model - https://sketchfab.com/3d-models/minion-donny-4f6fbb3f8d8d46b08e486dce246eb0b7 Thanks to https://sketchfab.com/jaspermateodev for the idea
The assembly consists of 14 of parts. For each individual part, I will attach instructions and possible printing problems that you may encounter. In short, you will need a properly calibrated printer.
First, you will need to print teeth (12 pcs) and a tongue
1) Teeth - make sure that the tooth sizes correspond to the CAD sizes, you can measure them in a slicer, otherwise the teeth will not fit into the right grooves during assembly.
2) Tongue - also make sure the x, y dimensions so that it fits into its seat.
3) Glasses - also watch the sizes of the outer and inner diameters, the gap (outer diameter) between the glasses and the base is 0.1 mm, the gap between the eyelid is 0.25 mm
4) Eyes + eyelids - Problems that I encountered when printing the eye + eyelid model.
The required gap
The assembly consists of 14 of parts. For each individual part, I will attach instructions and possible printing problems that you may encounter. In short, you will need a properly calibrated printer.
First, you will need to print teeth (12 pcs) and a tongue
1) Teeth - make sure that the tooth sizes correspond to the CAD sizes, you can measure them in a slicer, otherwise the teeth will not fit into the right grooves during assembly.
2) Tongue - also make sure the x, y dimensions so that it fits into its seat.
3) Glasses - also watch the sizes of the outer and inner diameters, the gap (outer diameter) between the glasses and the base is 0.1 mm, the gap between the eyelid is 0.25 mm
4) Eyes + eyelids - Problems that I encountered when printing the eye + eyelid model.
The required gap
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
