minion hueforge

Another 6 colour hueforge. I have enabled a pause so that you can change the 2 colours in ams . Have Fun! Post pics if you like it! Project: minion 1.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.12mmThe Model is 160x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.52mmThe Max Depth is 2.3mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Green Transmission Distance: 2.1 PLA BambuLab White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #13 (0.6mm) swap to Blue Gray At layer #26 (1.12mm) swap to Red At layer #29 (1.24mm) swap to Yellow At layer #35 (1.48mm) swap to Green At layer #37 (1.56mm) swap to White for the rest.