Thingiverse

Minirocket Lamp

by photoholic

28 Downloads

32 Likes

0 Makes

This lamp printed with approx. 35% infill (honeycomb) with a clear-material (I used Fillamentum Crystal Clear PLA) looks sooo great imho. All you need is an E14 socket and a switch and a cable with plug for your wallsocket...

I printed it with an i3 MK3 and it took over 30h. But it was sooo worth the time.

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

200 mm (Large)

Est. print time

30 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Minirocket Lamp?

Any FDM printer should handle Minirocket Lamp just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print Minirocket Lamp?

According to the design notes, Minirocket Lamp takes approximately 30 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Minirocket Lamp available in?

Minirocket Lamp is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Minirocket Lamp free to download?

Yes, Minirocket Lamp is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Minirocket Lamp

Add to Collection