MiniWhip Power Injector Case
door jbtronics
5
Downloads
2
Likes
0
Makes
# MiniWhip Power Injector Case with 9V battery
This is a case for the power injector delivered with my miniWhip active antenna.
The Case has two holes to lead out the antenna and receiver connections via BNC sockets.
Power for the antenna is provided by the internal 9V battery or an external power supply via a hollow jack socket.
I have added two shottky-Diodes (SB140) to decouple both power supplies and added an 250mA polyfuse. (If you use the Shottkey diodes, then you should short out the diode on PCB to minimize voltage drop).
This is a case for the power injector delivered with my miniWhip active antenna.
The Case has two holes to lead out the antenna and receiver connections via BNC sockets.
Power for the antenna is provided by the internal 9V battery or an external power supply via a hollow jack socket.
I have added two shottky-Diodes (SB140) to decouple both power supplies and added an 250mA polyfuse. (If you use the Shottkey diodes, then you should short out the diode on PCB to minimize voltage drop).
jbtronics publiceert ook op
32 extra modellen op 2 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!