Thingiverse
Minor Voron v2 mods
door casualTanker
38
Downloads
14
Likes
0
Makes
Belt clips designed to hold the z-belts of a Voron 2.4. May be useful in other applications too. Can easily be adjusted in your slicer software to fit broader or narrower belts.
Flex bed locator / stop. Affixed to 2020 extrusions with M3 screws and t-nuts.
Raspberry camera enclosure for the rear of the enclosure. Revolves and tilts. Base attaches to 2020 extrusion via one or two M3x20 screws and t-nuts. Camera enclosure requires at least two M2x10 screws and nuts. Cam_base_large_offset.stl is a version with more generous tolerances to the rack.
STLs should load into slicer in ideal printing orientation. No need for supports if you have properly calibrated bridging/overhangs.
Flex bed locator / stop. Affixed to 2020 extrusions with M3 screws and t-nuts.
Raspberry camera enclosure for the rear of the enclosure. Revolves and tilts. Base attaches to 2020 extrusion via one or two M3x20 screws and t-nuts. Camera enclosure requires at least two M2x10 screws and nuts. Cam_base_large_offset.stl is a version with more generous tolerances to the rack.
STLs should load into slicer in ideal printing orientation. No need for supports if you have properly calibrated bridging/overhangs.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!