Thingiverse
Mirror - motor mount
par matthewBurger
29
Téléchargements
32
Likes
0
Makes
This is a mirror/motor module for a laser Spirograph system.
The mirror is set to a 3 Degree angle.
To attach the mirror to the disc use a small peace of double sided tape.
The motor is attached to the motor_mount using double sided tape and a cable tie. This will help to limit the noise generated from the motor.
The motor used in the picture above, is from a computer CD drive. Most cd players will have this small motor in it.
Update:
* Changed mirror_mount from a 6 to a 3 degree angle and shortened the shaft to 10 mm in length
The mirror is set to a 3 Degree angle.
To attach the mirror to the disc use a small peace of double sided tape.
The motor is attached to the motor_mount using double sided tape and a cable tie. This will help to limit the noise generated from the motor.
The motor used in the picture above, is from a computer CD drive. Most cd players will have this small motor in it.
Update:
* Changed mirror_mount from a 6 to a 3 degree angle and shortened the shaft to 10 mm in length
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
