Misery Hueforge Bookmark

Misery Hueforge Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 51.16x133mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filaments Swap Instructions: Start with BambuLab Basic Black At layer #9 (0.8mm) swap to BambuLab Basic Blue At layer #11 (0.96mm) swap to BambuLab Basic Red At layer #12 (1.04mm) swap to BambuLab Basic Beige for the rest.