MiSTer FPGA Compact Case

I recently designed a case for the MiSTer FPGA console and thought I would share it with you. It supports the standard USB HUB and either Digital IO board or Analog IO board. There are different top pieces for the IO boards. It has 3 buttons that reach down to the buttons on the IO board. It also has a channel built into the case to hide the USB bridge board bracket that connects between the DE10 -Nano and the USB hub. I tried to make it as large as reasonably possibly, but due to a variety of different usb brackets, not all might fit it. So I could use some feedback there.You will need to print the bottom case piece, either Digital or Analog IO top shell piece and then 3 of the buttons. To complete assembly you will need a few screws and standoffs. Four m3 x 10 mm screws for the bottom of the caseFour m3 x 16mm screws for the top of the caseFour m3 x 14mm Hex standoffs to mount between the De10 nano and USB hub. Something like these will work: https://amzn.to/3z2JuXH Assembly:Use the