Thingiverse
Mitutoyo Digimatic Indicator Case
par AquaticBikes
1
Téléchargements
5
Likes
0
Makes
A protective case for my Mitutoyo Digimatic Indicator Model ID-C112AE (12.7mm by 0.001mm). It retains the indicator with a snug fit on the indicator body to protect the plunger.
This design uses two 5/8" by 1/8" diameter roll pins for the hinges and a 1" by 1/8" roll pin for the latch. If you don't want to buy roll pins a solid pin will work, you just have to toss a little CA to retain it.
Print the box in your material of choice, I used CF-PETG here but have used regular PETG and PLA without issue for similar cases.
The seal is designed to print in 85A TPE but any flexible filament should work.
A little felt on the inside of the lid upgrades the aesthetics a little. I have vapour phase corrosion inhibitor strip under the felt to protect the indicator for years to come.
This design uses two 5/8" by 1/8" diameter roll pins for the hinges and a 1" by 1/8" roll pin for the latch. If you don't want to buy roll pins a solid pin will work, you just have to toss a little CA to retain it.
Print the box in your material of choice, I used CF-PETG here but have used regular PETG and PLA without issue for similar cases.
The seal is designed to print in 85A TPE but any flexible filament should work.
A little felt on the inside of the lid upgrades the aesthetics a little. I have vapour phase corrosion inhibitor strip under the felt to protect the indicator for years to come.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
