MJ Flying

Jordan Taking flight. I only use numakers It works great in the AMS and prints great. Use this link for a discount. https://numakers.com/?ref=09v0k1co Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.55x112.81mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.6mm and the Actual Depth is 2.7mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 1.6 PLA+ Numakers Light Gray Transmission Distance: 3.2 PLA+ Numakers Pure White Transmission Distance: 4.8 PLA+ Numakers Nuclear Red Transmission Distance: 4.8This print uses 4 unique filamentsSwap Instructions: Start with Pitch Black At layer #14 (1.2mm) swap to Light Gray At layer #17 (1.44mm) swap to Pure White At layer #21 (1.76mm) swap to Pitch Black At layer #22 (1.84mm) swap to Nuclear Red for the rest.