MK10 Extruder Mod Revised

I have a Qidi Tech X-One with an Micro Swiss all Metal Hot end and when trying to use SemiFlex the filament kept pushing out the sides. I made the original version and just mirrored it because the Qidi X-One has the trigger on the left side. Either way on the bottom gap where you place a PTFE tube to guide it to the hot end just wouldn't sit where it was supposed to. So I decided to remix this so you no longer need the ptfe tube and the filament should be guided straight into my Micro Swiss All Metal Hot End with out issue. This should work in a stock hot end as well.

As you can see thanks to this extruder mod I was able to get this to Print on the Qidi X-One with no binding, or kinking issues. I find the best way to load the flexible filaments is to give the lever a light press, push the filament in gently until you feel resistance. Let go over the lever and let the machine guide the filament the rest of the way. I find if you press the lever to hard you leave a small gap for the f