Mk3s Afterburner

This mod allows you to use the afterburner on the bear axis without changing from prusa's firmware. You move the hotend 18mm forward but only lose 6.7mm of print area in the y axis (a longer spring steel sheet would account for this). I did remix this from multiple creators but not any primarily so I haven't linked all of them. All additional parts can be found here, https://www.thingiverse.com/thing:4362586 , https://github.com/Greg191134/Voron. Other hotend mounts can be found on the voron mod depository but the front cartridge will need to be trimmed by 0.5mm on the top to fit the warbird 5015 mod an more will be added to this page as I go. Toolheads can be swapped by using prusa's steel sheet selection. I added a version for both the v6 and volcano. almost all parts are carried over from the prusa. Non-standard parts are, Pancake stepper, bmg kit, m3 heat set inserts and m3 hardware.

fs sensor version added (fixed). The fs version removes the bmg drive gear's self align "featu