MK3S Laser Mount

I slightly modified the mount provided by vandenmar and made some changes.

First, I had to make the holes on the MOUNT 40.12mm apart vertically and 20mm apart horizontally so it could fit the laser I bought.

In the QOL department, I added holes for Hex Nuts in the CUFF, instead of having to buy threaded inserts like it was originally designed. You can use spares from the Prusa bag.

Additionally, the original design didn't work with the 45 degree part-cooling fan. To fix this, I extended the front face of the MOUNT upwards 10mm and moved both sets of holes upwards. This allows it to sit higher than the fan.

I've included the STEP file since you'll probably need to adjust the distance between the MOUNT holes for your laser. If you don't, use the included OBJ to print it.
No supports or anything are necessary as long as you orient it properly.

Full instructions on getting everything set up can be found here: https://www.instructables.com/id/Laser-Engraving-on-Your-Prusa-M